CORS is a reference base station that is used to collect GNSS satellite data continuously and transmit them via the internet to the central server. Combined with both advanced and traditional GNSS technology CORS provides an entire solution for data processing, management, etc.
Tracking 574 channels, HRS-1 has excellent compatibility with all GNSS satellites like Galileo, QZSS, IRNSS, GLONASS, Beidou etc.
Channels | 574 |
GPS | L1 C/A, L1P, L2C, L2P, L5 |
BeiDou | B1, B2, B3 |
BeiDou Global Signal | B1C, B2a |
GLONASS | L1 C/A, L1P, L2 C/A, L2P |
Galileo | E1, E5a, E5b, E6 |
QZSS | Reserved |
SBAS | WAAS, EGNOS, MSAS, GAGAN |
Operating temperature | 0 °C to + 50 °C |
Storage temperature | -10 °C to + 60 °C |
Humidity | Maximum 100 without condensation |
Waterproof and dustproof | IP67 |
Shock | Rugged aluminium case with rubber ring seal |
Post Processing |
3 mm + 0.5 ppm Horizontal 5 mm + 0.5 ppm Vertical |
Single Baseline RTK | 8 mm + 1 ppm Horizontal 15 mm + 1 ppm Vertical |
Network RTK | 8 mm + 0.5 ppm Horizontal 15 mm + 0.5 ppm Vertical |
DGPS | <0.4m RMS |
Standalone | 1m 3D RMS |
SBAS | 1.5m 3D RMS |
Correction data I/O | RTCM 3.X, CMR (GPS only), CMR+(GPS only) |
Position data output | ASCII: NMEA-0183: GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST, PJK, PTNL Extended NMEA-0183: BDGGA, GPNTR, GPCDT, GPHPR |
Observations | RTCM, RINEX |
Maximum 20 Hz data logging rate | |
Internal | 8/16 GB |
External | 1 TB |
Log File | 5 mins to 24 hrs |
Data retrieval and transfer | FTP and USB |
Power consumption | 15W |
External power input | 12V DC (max. upto 18V) |
Integrated internal Battery | 7.4V/6800mAh Li-ION |
Seamless switching between external and Internal Power so |
4 Lemo Ports | One 2-pin Lemo port for power supply and battery charging. One 2-pin Lemo port for solar/ backup supply. One 5-pin Lemo port (RS485 Protocol) One 5-pin Lemo port(RS232 * 2 Protocol) |
1 Standard USB port | Connect with external storage card |
1 RJ45 LAN Ethernet Port | Supports protocols HTTP, TCP/IP, FTP, NTRIP - 1 PPS output - 1 Event input |
1 SMA male Connector | For Wi-fi stablize |
1 TNC connector | GNSS Antenna connector |
Size(L × W × H) | 204 mm × 156.3 mm × 87 mm |
Weight | 1.586 kg |
Housing | Rugged aluminium housing |
Front panel display | OLED Display Buttons for configuration |
Web User Interface | Allows remote configuration data retrieval and firmware updates |
Recommended Antenna | GN100 |
GPS+Glonass+Beidou | 20 ns |
Fill the form given below or write us at marketing@apogeeprecision.com. We will reply to your query within 24 to 48 hours. However, most of the time, we reply early than the given time.