The ALGR-1 GNSS receiver has a compact design, rugged form, and is easy to use with its small volume (850 gm). It is powered by a high capacity (6800 mAh) Li-ion single battery to ensure continuous operation. Build-in 4G modem makes sure ALGR -1 flawlessly works with every type of cors.
Up to 4 km range with 1W power consumption, Tx/Rx with a full frequency range from 866 MHz.
ALGR-1 GNSS receiver brings both centimeter and millimeter level accuracy no matter where you are.
ALGR -1 GNSS Receiver can be paired with ranges of GIS handhelds and data collectors to provide easy to use solution for surveying, mapping and navigation, etc.
184 channels for simultaneously tracking satellite signals | |
GPS | L1, L2 |
BeiDou | B1, B2 |
GLONASS | L1, L2 |
Galileo | E1, E5 |
Operating temperature | 0 °C to + 50 °C |
Storage temperature | -10 °C to + 60 °C |
Humidity | 90% |
Waterproof and dustproof | IP67 |
Shock | Designed to withstand upto 2 m drop |
Static | 8 mm + 0.5 ppm Horizontal 12 mm + 0.5 ppm Vertical |
Real Time Kinematic | 15 mm + 1 ppm Horizontal 20 mm + 1 ppm Vertical |
Frequency | Up to 10 Hz |
Protocols | NTRIP, VRS, RTCM 3.x |
Position Output | NMEA Output |
Position data output | 1 Hz, 2 Hz, 5 Hz, 10 Hz |
Size(L × W × H) | 140 mm × 99 mm |
Weight | 850 g |
LEDs | Satellite Tracking RTCM In/Out Radio Status Bluetooth Status GSM Signal Strength |
Android-based data collection software |
UHF Radio: | Tx/Rx 865-867 MHz |
Transmit power: | Upto 1 W (Adjustable) |
4G modem | |
4G Bands: | 800/850/1800/2100 MHz |
Bluetooth® : | V5.0 protocol |
Fill the form given below or write us at marketing@apogeeprecision.com. We will reply to your query within 24 to 48 hours. However, most of the time, we reply early than the given time.